List of error codes for the Frisquet Teamao air-to-water heat pump

Download the manual for the Frisquet Teamao air-to-water heat pump

• Check that the green indicator light on the M/A button is on.
• Make sure the “Vacation” program is not activated.
• Check the dashboard screen to see if an ERROR is displayed:

 

• Outdoor Unit Error

You must contact a professional.

 

• Outdoor Temperature Sensor Error

You must contact a professional.

 

• Heat Exchanger Sensor Error

You must contact a professional.

 

• Domestic Hot Water Sensor Fault

You must contact a professional.

• Water shortage: Water pressure is too low
• Increase the pressure by opening the system’s fill valve(s).
• The pressure is too high

The “electronic valve” prevents the heat pump from operating:

• Drain some water from the bleed valve of a

radiator until normal operating pressure is restored (1 to 1.6 bar).

 

• Pressure sensor fault
• Be sure to contact a

 

Domestic hot water (if TEAM.260L tank): the water is cold

The Hot Water mode selection must be set to “ON” (enabled)

• If “ON” is set, contact a

 

The heating doesn’t work or works irregularly

• Check that the communication satellite is correctly set and is in a position matching the desired operating mode.
• Check that the satellite’s batteries are in good working order; as a precaution,
• Check that the “Vacation” program is not enabled.

 

• A fault is being reported: Contact a

 

• No fault is being reported

It may be an air bleeding issue, contact a professional.